3 Types of Vinyl Gates for Every House in LA

Every owner of a private house, whether it is a summer house or a building for permanent residence, upon completion of construction is faced with the task of installing a gate. In fact, vinyl gates offered in the modern construction market can satisfy any practical and aesthetic needs. Properly selected gatefor a private house will be the decoration of the entire architectural ensemble. 

vinyl gate

When choosing the gate for your house in LA, you should proceed, on the one hand, from the point of view of the practicality, and on the other hand, from design considerations. It is important that the design does not violate the overall harmony. Even the most beautiful gate can look ridiculous if it is stylistically inadequate for the house. In our review, we will talk about 3 types of vinyl gates for every house in LA.

3 types of vinyl gates for every house in LA

Swing vinyl gates

The design of swing vinyl gates is extremely simple. Their advantages are as follows:

  • ease of installation;
  • ease of care.

The main disadvantage is that you must have available space for opening the gate. In addition, stoppers must be provided, because, during strong winds, the valves can damage the body of the entering vehicle.

Vinyl Gates
Vinyl Gates

Sliding vinyl gates

The main advantage of this design is that no space required foropening the gate. However, there are also disadvantages:

  • the complexity of installation;
  • the need for more care due to the heavy load on small parts.
Closed Top Picket Fence With Sliding Gate
Closed Top Picket Fence With Sliding Gate

Automatic system

For those owners of private houses who are fans of convenience and comfort, such a modern solution as the entrance gate with automatic system will be suitable. They are equipped with an electric drive and operate in automatic mode. All is needed for vinyl gate with the automatic system is an electric motor of relatively low power and simple electronics.

Electric gates enable the owner to open and close the gate while in the house or in the car. Currently, there are designs equipped with sensors tuned to the signal of the host machine, and themselves open or close when it is supplied.

As a rule, the electric drive is installed on a sliding gate. Automation of the opening and closing of swing gates is of great cost.